Skip to content

From Past to Present: Autel Diagnostics' Tool Evolution

Autel Technology Co., Ltd. was established in 2004. Since its launch of the world's first intelligent car code reader in 2005, innovation has driven continuous innovation in automotive diagnostic tools.

From a simple handheld OBD code reader, to the ability to perform basic diagnosis of four systems, and then to full system diagnostic functions, the Autel vehicle diagnostic scanning tool is constantly developing towards more comprehensive functions and wider coverage.

With the development of the times, Autel closely follows the trend of automotive development and promotes the development of intelligent automotive diagnostics. It has built the Internet function in intelligent terminal products, and based on the massive remote diagnostic data collected and accumulated, it has realized the business expansion of cloud services.

About Autel North America

Handheld OBD2 diagnostic scan tool

Autel AL/ML Series

As the earliest handheld car diagnostic tool launched by Autel, it only supports reading and clearing codes for OBD2 faults. Its advantages are small and portable, and cheap price. It is very friendly for individual enthusiasts and small repair shops.

You must be curious why I put ML and AL in the same category? This is because previously, apart from the fact that AL was sold offline and ML was developed specifically for online sales, the other functions of these two types of products were the same.

However, currently there is no distinction between them, and you can still buy the AL series online. The functions corresponding to the same numbers in the AL/ML series are also the same, with larger numbers having more functions.

MD Series OBD2 scanner

The MD series remains a handheld diagnostic scanning tool. But compared with the AL/ML series, it has made significant improvements in diagnostic functions and maintenance services. It can not only read and clear error codes through OBD2, but also diagnose the fault codes, version information, data flow, and freeze frames of the entire system.

In addition, it also provides some simple maintenance functions, such as Oil Reset, EPB, SAS, etc.However, the Autel MD series cannot conduct a full-system diagnosis from the very beginning. You should know that no change can be achieved overnight.

 For example, Autel MD808 only supports diagnosis of OBD2 and four systems (transmission system, driving system, steering system, braking system).

The advantage of the Autel MD series is that it is the same small and portable, but the diagnostic function is more comprehensive, and the price is cheaper than the tablet series.

Representative diagnostic tool display

  • Autel AutoLink AL619
Autel AutoLink AL619 OBD2 Scanner

The AutoLink AL619OBD2 tool is an ideal tool for detecting faults in the anti-lock braking system (ABS) and airbag system (SRS) of vehicles, and it also supports the OBD II diagnostic function.

 This tool helps users quickly identify faults through visual and auditory prompts, and the troubleshooting information on the screen can accelerate the repair process.

  • Autel MaxiLink ML629
Autel MaxiLink ML629 OBD2 Scanner

TheMaxiLink ML629MaxiLink ML629 scanner can help you diagnose the cause of the malfunction indicator light or ABS/SRS warning light coming on. It supports all 10 testing modes of OBDII, providing you with a comprehensive diagnostic solution. ML629 is suitable for a wide range of European, American, and Asian brand vehicles.

  • Autel Maxidiag MD808 Pro
Autel Maxidiag MD808 Pro OBD2 Diagnostic Tool

Autel MD808 Pro diagnostic scanner redefines professional testing standards, perfectly combining multi-functionality with portability.

This 4-inch handheld device not only accurately read the fault codes of the entire vehicle system, but also integrates multiple professional-level functions: fuel service reset, battery matching, brake pad reset, steering wheel calibration, throttle matching and DPF regeneration, comprehensively covering all kinds of maintenance needs.

Tablet-type OBD2 diagnostic scanner

MX Series full system diagnostic scanner

The Autel MX series diagnostic scanner has been upgraded to a tablet format. On the basis of the MD series, more service functions have been added, with a larger screen, clear interface guidance, and simple operation. At the same time, this series of models has a wider coverage range and supports bi directional/active test functions.

DS Series OBD2 tool

The Autel DS series has been further upgraded. Further increases have been made in the number of diagnostic functions and maintenance services supported, especially for the DS808 series and above, which can perform motion testing and bidirectional control.

Autel MS Series

The Autel MS series diagnostic scan tool is the latest series launched by Autel. From the OBD2 scanner of the MS906 series to the Ultra series, its functions are still constantly increasing, covering up to 99% of the vehicle models. It even supports special functions such as ECU programming (only for BMW and Mercedes-Benz).

At the same time, vehicle diagnostics are moving towards the intelligent stage, supporting not only remote assistants but also the latest Ultra S2 scanner equipped with intelligent voice assistants. The connection method is no longer limited to wired connection. Wireless Bluetooth connection makes diagnosis more convenient, and the upgrade of VCI enables simultaneous and in-depth analysis of test components.

Representative OBD2 scan tool display

  • Autel MaxiCheck MX900
Autel MaxiCheck MX900 OBD2 All System Diagnostic Scanner

The MaxiCheck MX900 a versatile automotive diagnostic tablet that is fully compatible with American, Asian, and European models since 1996. This 8-inch touch device with Android system is equipped with a high-performance quad core processor, ensuring fast response and smooth operation, providing efficient and professional solutions for whole vehicle system diagnosis.

  • Autel MaxiDAS DS900BT
DS900-BT Wireless Diagnostic Scanner

The Autel DS900BTis equipped with a powerful quad-core processor and an 8-inch high-definition touch screen. Based on the Android system, it can efficiently handle multiple tasks and quickly read and clear the fault codes of the entire system of mainstream brand models.

As a professional-level diagnostic device, it integrates core functions such as oil reset, EPB, SAS, BMS and DPF, providing maintenance technicians with a comprehensive intelligent diagnostic solution.

  • Autel MaxiSys Ultra S2
Autel MaxiSys Ultra S2 Diagnostic Scanner Tablet

The Ultra S2 scanner has advanced diagnostics system with special functions,Including visualization of topology map 3.0, data flow 3.0, and multi-system detection 3.0 and 150+ brands remote programming ,ect.It has a Samsung Exynos octa-core processor, a 12.7-inch TFT-LCD capacitive touchscreen and substantial 256GB built-in memory.

How to choose Autel's vehicle diagnostic scan tool?

The Autel OBD2 diagnostic tool covers various stages from low-end to high-end, from simple diagnosis to full range diagnosis, from simple maintenance functions to 40+ multifunctional maintenance.

If you are an individual enthusiast with a limited budget or a small repair shop, and only need a diagnostic scanning tool that can perform simple fault code reading and clearing functions, then the handheld OBD2 diagnostic scanner will be your choice.

If you need a diagnostic tool that can scan the entire system and support multiple maintenance service functions, as well as bidirectional control and ECU coding and programming functions, then I would recommend the diagnostic tool of the Autel tablet series more. There are many diagnostic scanning tools in this series. You can choose the diagnostic tool that suits you better according to your budget and needs.

Conclusion

Autel's automotive diagnostic scanning tool has been developing through continuous innovation. There is no fixed thing, constantly catching up with the pace of the times through innovation, and ultimately standing at the forefront of the times.

The updated diagnostic scanning tools provide consumers with a wider range of choices. Whether you are an individual who wants to DIY, a car repair expert, or a large car repair shop, you can find OBD2 diagnostic tools that meet your needs at Autel.

Previous article Autel MaxiSYS Ultra S2: Unleash Precision in Vehicle Diagnostics
Next article Autel Scanner Guide: Learn About ECU Programming and Coding

Leave a comment

Comments must be approved before appearing

* Required fields

Latest Posts